What Is The Best Tool To Cut Plexiglass?

Can you cut plexiglass with a jigsaw?

If you have a jigsaw, you can cut Plexiglas.

One trick to help prevent splintering is to stick painter’s tape over the cut line.

Also, don’t forget the blade: Find an uncoated (that is, unpainted) fine-toothed sheet metal jigsaw blade (such as DeWalt’s 32 TPI)..

Does Home Depot sell cut plexiglass?

Home Depot does not cut any glass, including plexiglass. You would have to take it to a window/glass specialist/specialty store, or special order your piece through the Customer Service or Millworks desks.

Can you cut plexiglass with a razor blade?

For thicker sheets of plexiglass, cut with a power saw—be it a circular saw, saber saw, or table saw. (To cut anything but a straight line, opt for a jigsaw.) … There are special blades designed expressly for acrylic, but any metal-cutting blade with carbide tips can do the trick.

Can you cut plexiglass with a hacksaw?

Plexiglass is used for many different applications and acts as an alternative to glass. It is much stronger than glass and is a type of acrylic. … There are a variety of ways to cut plexiglass, and one of the least expensive methods is to use a hacksaw, especially if you only have a few pieces of plexiglass to cut.

Can you cut plexiglass with a router?

If you don’t have one of several types of power saws available to use, if you have a router, it is possible to cut plexiglass with it. Provided you have the correct blade designed to make a flush cut, a variable speed router, when done right, will cut plexiglass.

Does Lowes cut plexiglass to size?

Thinking of purchasing Plexiglass sheets at Home Depot or Plexiglass at Lowes? This is not the thin film masked material you see there. They don’t cut and frankly, we are less expensive and offer an array of services so you get exactly what you want. … Note: Plexiglass is NATURALLY UV RESISTANT.

What blade do you use to cut plexiglass?

circular saw bladesFor best results with Plexiglas® MC acrylic sheet, circular saw blades should be the largest diameter possible and contain 60 carbide-tipped teeth with a triple-chip-tooth design. Teeth should be shaped with a 5° to 10° positive rake angle and have sharp cutting edges with adequate clearance.

What is the best jigsaw blade for cutting plexiglass?

Bosch 3-5/8 in. x 10 TPI plastic-cutting jig saw blades are designed for plexiglass. The Unique tooth geometry provides fast, chip free cuts in plexiglass. Bosch is the world-wide market leader for jig saw blades.

Can you cut plexiglass with a Dremel?

From metals and wood to fiberglass and plexiglass, Dremel rotary tools can handle the job quickly and efficiently. Dremel rotary tools cut material at very high cutting speeds (from 10,000 to 35,000 RPMs) so the cuts are high quality and are considered a fine finish.

Can you drill holes in plexiglass?

Using a specialty drill bit can help finish your project neatly and safely. Plexiglass is a clear, plastic, lightweight alternative to glass. Drilling holes in plexiglass can be challenging. Often the traditional drill bits, used for metal and wood, chip and crack the plexiglass while drilling through its surface.

Can you cut plexiglass with a box cutter?

Plexiglass can be cut with the typical tools that are found in a woodworking studio. … Use a glass cutter, or the dull end of a box cutter to begin to score the line that you want to cut. You will need to score each line several times, and the deeper the score, the better the easier it will be to break off the piece.