Quick Answer: What Is The Best Way To Apply Deck Sealer?

How often should you apply Thompson’s Water Seal?

every one to three yearsApplying a sealer and/or stain typically is recommended every one to three years, depending on the finishing product, deck use, weather conditions, and sun exposure.

All Thompson’s WaterSeal products are DIY-friendly, and most need only a single application on a clean, dry deck..

Should I use a brush or roller to stain my deck?

You should use a roller brush or sprayer to apply a steady coat of quality stain, such as Olympic Elite stains or Olympic MAXIMUM stains. If you see that too much wood stain has been used in an area, use a roller or brush to fix the imperfections.

Should I seal my deck after power washing?

Your deck needs at least two full days to dry after you wash it and before you seal it. While you can always apply sealer with a paintbrush, it’s faster and easier on your knees to use a roller or a sprayer.

What is the best way to protect a wood deck?

No matter the age, always make sure your deck is sealed. Seal your deck to protect it against moisture from rain and dew, which will cause the wood to swell. Sealing the deck will also protect it against the sun, which can shrink and dry the wood.

How long does Thompson’s Water Seal last?

10 yearsIf applied correctly, Water Seal will last up to 10 years. This is dependent on conditions such as orientation of the wall and local climate.

Is oil or water based deck stain better?

Oil molecules are smaller than water molecules so it penetrates better in comparison. The better a wood decking stain penetrates the better it performs and lasts. By nature, oil based deck stains are easier to apply than water based. … Oils stains are normally more natural looking than water based stains.

Is it better to stain or seal a deck?

Many deck companies recommend using a combination stain/sealer product, which is basically a sealer with pigment added. The advantage of this, they say, is the sealer provides additional protection against water and weather damage, while the stain helps reduce fading from UV rays.

Is Thompson’s Water Seal any good?

5.0 out of 5 stars Love Thompson’s Water Seal with the harvest gold color! Basically, it takes your weather worn fence and restores it back to almost new looking boards, plus protecting it from the elements. I used my spray gun to apply, and a little goes a long way. Obviously, you can use a brush to apply it as well.

Can I mix stain and Thompson’s Water sealer?

As long as it’s all oil based you should be able too. But if it’s a solid color stain it might turn a little transparent if mixed with the sealer..just give it a try on a scrap piece.

Can I use a roller to stain my deck?

A paint roller can be used to roll stain on. … A wide 18-inch roller may work well for staining a few fence or deck boards at a time but a mop or stain pad will hold more stain lessening the amount of time you have to dip back into the stain bucket.

Should you put a sealer over stain?

Most are designed to penetrate into the wood or at least adhere to the bare wood in the case of film-forming stains. Applying a clear sealer over a deck stain is never a good idea. It really won’t help the deck stain or give any added protection more than the deck stain already is.

How often should a deck be stained and sealed?

For most decks, sealing once each year is a good rule of thumb. Depending on the condition of your deck this can be adjusted, but keep in mind that you should never go beyond three years maximum before re-sealing and staining.

What is the best sealer to put on a wood deck?

BEST OVERALL: SEAL-ONCE MARINE Penetrating Wood Sealer SEAL-ONCE MARINE Penetrating Wood Sealer is a clear water-based sealer, but it provides the protection you’d expect from an oil-based stain, penetrating right down into the wood fibers for long-lasting protection against moisture damage and mold growth.

How many coats of Thompson Water Seal do I need?

one coatThompson’s WaterSeal Waterproofing Stains. Application: Only one coat is recommended for both Semi –Transparent & Solid. A second coat can be added if more color is desired. Allow the first coat to dry (approximately 2 hours) before second application.

What is a good deck sealer?

Here are some of the best deck sealers on the market:Thompsons Waterseal Advanced Natural Wood Protector.ECO-SAFE Wood Treatment – Stain & Preservation by Tall Earth.Rust-Oleum Coppercoat Wood Preservative.CabotStain Australian Timber Oil Penetrating Oil.Thompsons Waterseal – Transparent Stain.More items…

What is the best method to stain a deck?

Deck stains can be applied in several different ways. Using a pump-up garden sprayer and roller are two popular methods. Regardless of how you apply your wood stain, keep a paint brush at hand. A paint brush will work the stain deep in to the pores of a board.