Quick Answer: How Long Is Cerakote Good For?

Can you remove Cerakote from a gun?

Among these methods, the most efficient way to remove Cerakote without melting your gun would be to use a sandblasting machine along with Garnet or Aluminum oxide of 100 to 120 grit between 35 and 40 PSI.

After cleaning it with Acetone, oil all of your parts..

What is the most durable gun finish?

The most durable gun finishes are Quench Polish Quench, Chroming, Nickel Boron, Duracoat, Cerakote, and Anodizing. The least durable is bluing but is one of the most attractive tied with chroming and plating. Duracoat is by far the most cost effective and easiest to apply, and is also extremely durable.

Why is Cerakote so expensive?

The reason it’s so expensive is because it is really hard and requires tons of time to do properly. I can guarantee you that the $250 they are asking for each job won’t even properly cover their time. We pretty much “donate” lots of time to each cerakote job we do.

How long does it take for Cerakote to cure?

For optimal cure, place the coated pieces in a 250°F oven and cure for 2 hours. For a quick cure, 1 hour at 300°F is sufficient. If the substrate material is heat-sensitive (such as plastic or wood) then a 200°F cure for 2 hours is adequate.

Is Cerakote bad for your gun?

If it’s a regular modern gun, and you want it to look a certain way, there is nothing wrong with cerakote. It’s a good finish. It’s durable and it will prevent corrosion. You can cerakote metal, but you cannot cerakote plastic.

Does Cerakote rub off?

No it’s not normal to rub off with your thumb. I spray a lot of it and it’s tough stuff. Sounds like not enough hardener or its not Cerakote. Even the c-series would hold up to thumb rubbing.

Is Cerakote good for your gun?

The ceramic in the Cerakote keeps the gun from getting scratched if it bumps into different things or gets dropped. The thin layer also protects the moving parts from wear. This keeps the gun in the proper specifications for longer so you don’t have to replace parts and it keeps functioning correctly.

Can you Cerakote yourself?

Cerakote also has a list of officially affiliated shops that do the work, so there may be one in your area. However, should you decide to do the work yourself, there are two formulas of Cerakote: oven-cured and air cured.

Is Cerakote better than DuraCoat?

Cured Cerakote absolutely beats cured DuraCoat in every measurable respect with regard to finish quality, abrasion resistance, and overall toughness.

Is Cerakote scratch resistant?

Cerakote® is a ceramic polymer based proprietary formulation that offers industry-leading durability, hardness, scratch resistance, corrosion resistance, flexibility, heat, and chemical resistance. Cerakote® can be applied to most substrates including metals, plastics, polymers, composites, hydrographics and PVD.

Does Cerakote expire?

Details for Cerakote Storage We warranty all Cerakote products for 12 months from the date of shipment. … If you are having issues with Cerakote product and we determine it to be defective, we will replace the coating or fully refund the original price of purchase.