Quick Answer: How Do You Fix A Badly Stained Deck?

Is there a deck stain that doesn’t peel?

A: Many experts agree that the best finish for pressure-treated wood is a semi-transparent stain.

This stain penetrates the wood and won’t peel, unlike some solid-colour stains, which sit on the surface like paint and can peel and flake under some conditions..

Should I power wash my deck before staining?

Pressure washing can help, but if you want your stain to last, using a good deck cleaner and brightener on the deck prior to pressure washing will provide you the best result. A good deck cleaner can remove the gray fibers, dirt, mold, mildew and other impurities deep in the wood.

What is the longest lasting deck stain?

Opaque: Also called “solid,” this stain contains the most pigment and it will protect the wood longest, requiring recoating only every four to five years. It’s also the densest and will hide the wood grain completely.

How long after staining deck can you walk on it?

about 4 hoursIn most cases a full body stain or acrylic deck finish will be dry to touch within an hour in dry, hot weather. After two hours you could take a chance and walk on it with shoes, though I’d recommend barefoot. After about 4 hours you should be able to safely walk on your deck.

How do you clean a deck without removing stains?

Baking soda will remove dirt, grime and odor from your deck without harming the stain. Furthermore, since baking soda is natural it will not harm children, pets, wildlife or plants. Baking soda can be used as a deck cleaner by mixing 1 cup soda with 1 gallon warm water.

Will pressure washing remove deck stain?

It’s also called pressure washing and can remove grime like mold, mildew, dust, dirt, and even loose paint. If you’ve got a tough stain, pressure washing is a good solution for fast and easy clean-up. … In the end, yes – pressure washing is safe for your deck, but only if done right.

Can I stain without sanding?

With the oak cabinets, the grain was very evident post-staining. Gel stain will not require you to sand the product to a raw wood finish. It can be applied over only lightly sanded pieces just as well.

What happens if you don’t sand before staining?

It all starts with sanding. You need a smooth surface with no blemishes because stain will highlight scratches and dings in the wood. Always sand down to clean wood (if you have enough meat left of the wood) before applying any stain. … Too fine and the wood won’t be able to accept the stain.

How much should you sand before staining?

The grades of sandpaper used most for furniture finishing fall in the fine and very fine categories – that is from 120 grit through 220 grit; with 320, 400 and 600 grit used for special purposes. For “hard to stain” woods, finish sanding with 120 grit will usually accommodate the problem.

How long after pressure washing a deck can you stain it?

48 hoursAfter a deck has been power washed it will have some retained moisture within the wood. It’s important to let the wood dry thoroughly so none of the water that soaked into the wood gets trapped under the stain. In perfect drying conditions, 48 hours is enough for the wood to get to where it needs to be before staining.

Do you have to remove old stain before restaining deck?

Do You Have to Remove Old Stain Before Restaining Deck stains resist moisture and protect the wood from UV, rot, and mildew. They are either oil-based or water-based and come in transparent, semi-transparent, semi-solid, and solid or opaque. … Removing the old stain before reapplying a new coat isn’t always necessary.

How long will a stained deck last?

three to five yearsIt won’t last for more than a few years. On average, decks need to be stained again every other year. A quality, professional paint job will last longer than a quality, professional deck staining. However, an oil-based semitransparent stain can last for three to five years.

Can you stain a different color over stain?

Staining over stain is easy and works beautifully if your applying a dark stain over a lighter stain on raw wood. 2. You can mix 2 or more stains together to make DIY custom stains.

Why is the stain on my deck peeling?

Deck stains will generally peel for two basic reasons: over application and poor adhesion. This is simple — too much stain on the surface of the wood. … If there is too much stain, it restricts the moisture from evaporating away, so peeling can occur.

Is it better to stain or seal a deck?

A: It’s really up to you. Just staining the deck will give you the color you want, although in high-traffic areas the stain could wear away quickly. … The advantage of this, they say, is the sealer provides additional protection against water and weather damage, while the stain helps reduce fading from UV rays.

Can you stain over stain on a deck?

Don’t use solid stain on a deck or any surface you want to walk on because it’s too thin and won’t hold up. You can use solid stain over existing solid or semi-transparent stain, but semi-transparent stain over solid stain will look strange and won’t last. … Don’t skimp on stain quality.

Can I stain over stain without sanding?

Minwax® PolyShades® is an easy way to change the color of your currently stained or polyurethane finished wood. There’s no stripping or heavy sanding necessary to remove the old finish!