Quick Answer: Can You Use Zinsser BIN Outside?

Is Zinsser paint any good?

Zinsser Allcoat great stuff, as mentioned above, multiple coats on in a day.

It covers well and dries great.

The white isn’t the best for coverage, but the black always performs well.

It has the added bonus of being a primer, undercoat and topcoat in one, so you only usually need the one product instead of multiples..

Do I need to undercoat over Zinsser BIN?

Re: Zinsser B-I-N You usually do two coats of BIN and then you do not need to undercoat just go with two top coats. This would be the procedure if you are covering over varnish type finishes.

Does Zinsser BIN kill mold?

Zinsser Mold Killing Primer can be used to paint over and kill existing surface mold, mildew and odor-causing bacteria. … If you’ve already treated a moldy area with bleach in the past, you should first wipe the area down with warm water and detergent to remove the layer.

Can you use water based paint over shellac?

Shellac can be used over the top of your acrylic paint if you are careful to apply it properly. You can use one coat to seal the wood. All you need to do is rub it on liberally and then wipe the surface to seal it.

How many coats of Zinsser primer should I use?

One coat of a high-quality water-based primer (e.g., Zinsser Bulls Eye, available on Amazon) or oil-based primer (e.g., Zinsser Cover Stain, also available on Amazon) is all you need to bind the old white paint and the new shade, mask stains and recently patched/sanded areas, and reduce how much new paint you’ll need …

What is better Zinsser or Kilz?

When applied to two different walls in the same space, two coats each, Original Kilz Primer allowed more bleed-through, while Zinsser provided better coverage. However, Kilz Premium is a high-hiding formula, with a whiter, thicker consistency for superb opacity.

How many coats of bin primer do I need?

Very porous surfaces may require two coats which may reduce the square foot coverage of the product. B-I-N is an excellent interior stain killing primer. One coat effectively blocks stains, including water, nicotine, ink, crayon, marker, rust and smoke stains so they will not bleed into the topcoat.

Is it OK if primer is patchy?

The primer coat doesn’t have to be perfect, but it should cover the surface (no bare spots) and it shouldn’t be so blotchy that you get drips or visible unevenness. You need to prime the surface thoroughly. The purpose of the primer is so give the surface uniform absorbtion properties.

What Colour is Zinsser BIN?

WhiteTechnical SpecificationsBrandZinsserRangeB-I-NColourWhiteLocationInterior & exteriorSuitable surfaceMulti-surface6 more rows

Can I emulsion over Zinsser BIN?

Yes you can paint over that – just make sure it is properly dry. Also if you are doing two coats over it make sure you also leave a good amount of drying time between. BE123 seems to slow the drying process a little and you will find the paint dragging if you try and second coat to soon.

How long after Zinsser primer can I paint?

Most latex primers dry to the touch within 30 minutes to 1 hour. But do not paint the wall until the primer dries thoroughly, which can take up to 3 hours. High humidity and cool temperatures prolongs drying times.

Can you use water based paint over Zinsser BIN?

allthebuttons. Zinsser’s primers (BIN, 123 and Cover Stain) all say in their technical docs that they can be painted over with any water-based or solvent-based topcoat.

Is Zinsser BIN waterproof?

It can be recoated in just four hours and dries to a smooth, bright white, non-yellowing finish that resists dirt and dust pick-up. Watertite® waterproofing paint is guaranteed to keep water out and contains a biocide that protects the dried coating against fungal degradation for a minimum of 5 years.

What is the difference between Zinsser BIN and Zinsser 123?

BIN is solvent (methylated spirit) based, 123 is water based both are good stain blockers but BIN is better for resin (knots etc) only for spot priming when used outside (no idea why I painted a whole stack pipe in it no problem) while 123 is for large areas.

What is Zinsser BIN used for?

B-I-N® is the ultimate shellac-based primer, sealer and stain killer. It is perfect for use on interior surfaces and spot priming of exterior surfaces. B-I-N® offers unparalleled adhesion to glossy surfaces – including glass – without the need for scuff sanding and blocks stubborn and persistent stains.

How long can you leave primer unpainted?

30 days30 days is what most manufacturers recommend before needing to be re primed. It will be fine, but depending on top coat, you may need to sand it, cos exterior primers dry fairly shiny, and once cured, adhesion relies solely on keying as opposed to bonding as well.

Can you use water based paint over bin primer?

Any oil or latex paint can be applied over it. Professionals love B-I-N because it dries faster than any other primer.

Can I use BIN Primer outside?

It’s the best primer for sealing interior wood and is the “go to” primer for spot priming knots and sap str eaks inside and outside. … Great for interior woodwork and trim, B-I-N can also be used as an exterior spot primer on knots, rust stains and other hard to cover wood surfaces.