Question: What Size Is A 517 Spray Tip?

How do you know what size spray tip to use?

Understanding the NumbersThe first digit is half of the fan width, the “5” in “517” equals a 10 inch spray fan width (5 x 2 = 10)The last two digits are the size of the tip opening in thousandths of an inch, the “17” in “517” means the tip hole size is .017 inch..

Are airless spray tips Universal?

Threads on the spray guard are universal – the standard size is 7/8” – and fit most spray guns. You can use Graco guards on Wagner spray guns, and Wagner guards on Graco spray guns. FARBMAX and Titan also use the standard 7/8″ thread, so you should be able to use the spray guards across all models and brands.

Is it OK to thin latex paint with water?

Latex is a type of water-based paint, which you can thin using water. On the other hand, oil-based paints require the use of oil-based type of paint thinner. Generally, latex has a much thicker consistency that oil-based ones.

Is it better to spray or roll ceiling?

To Spray or Roll? Some painters break out a roller when it’s time to paint a ceiling, but it isn’t always the best tool for the job. If you’re planning on painting the entire room, a paint sprayer is much more efficient, especially if the ceiling is heavily textured.

What is a 517 spray tip used for?

Achieve greater control and less overspray on different surfaces with a wide range of coatings, from stains to exterior paints. 10 inch spray pattern ideal for larger surfaces such as houses/buildings, walls and ceilings.

What size tip do you need to spray latex paint?

Choosing an Airless Tip Size Based on Material to be SprayedVarnishes (before low VOC)*.009.011Latex paint – interior.013.017Latex paint – exterior.015.019Primers – latex.015.017Primers – oil.017.01916 more rows

Why is my spray tip spitting?

Spray guns spit when air is being introduced into the fluid outside of at the air cap. … A loose fluid nozzle does not properly seat in the tip of the spray gun and causes air to enter the fluid supply resulting in spitting.

What is the best spray tip for trim?

FFLP Tip Sizes for Cabinets The two fine finish tip sizes I use the most for spray painting cabinets are 210 and 310. The 210 produces a four-inch spray fan, and the 310 a six-inch fan. The 310 is awesome for spraying cabinet doors, and I like using the 210 for spraying the framing on the fronts of wall boxes.

What size airless spray tip is used to spray door frames?

A basic rule of thumb is to use small tip sizes (such as 0.009in, 0.011in, 0.013in) for thin / low viscosity materials such as stains & lacquers, medium tip size (such as 0.015″, 0.017″, 0.019″) for acrylic latex / enamel / emulsion / primer etc., then for heavier viscosity coatings use large orifice sizes (such as …

How long does an airless spray tip last?

A RAC IV or RAC V spray tip will last for approximately 40 gallons. All tips will vary depending on pressure that the user is spraying at the the type of paint being sprayed.

Are Graco and Titan tips interchangeable?

Amazon.com: Customer Questions & Answers. This only fits Graco RAC X tip guards but Graco tip guards will fit Titan guns. The tips alone aren’t interchangeable within the different guards though.

What does a .517 tip mean?

“The 3 numbers used to describe a tip size, example 517, refers to the fan size and the orifice size. The fan size of a 517 is 10 inches wide, one foot from the surface being sprayed. The first number is always ½ the actual fan width. The last 2 numbers refer to the actual size of the orifice.

What do the numbers mean on a spray tip?

Most spray tips are identified by a three-digit code. The first number, when multiplied by 2, tells you how wide of a fan the tip will create when sprayed at a distance of 12 inches from the surface. … For example, a 515 tip will spray a 10-inch-wide fan and have a 15-thousandths of an inch orifice.

Can I spray latex paint through a spray gun?

Latex paints are now made of new synthetic resins, which are compatible with water, have a thinner consistency and are wet enough to be used in a spray gun. … However, you still may find that your latex paint is too thick for your spray gun’s nozzle and needs thinning.

Do I need to back roll after spraying primer?

Conclusion. Typically, back rolling after spraying on walls and ceilings is ideal especially for your primer. It will help in promoting better adhesion of the primer and reduce issues of raised filaments with drywall.

Why is my paint sprayer leaving lines?

The main causes of streaks and disturbances in the spray pattern when using Airless devices are: Pressure set too low. Nozzle worn. Material supply disrupted (eg clogged filters)