Question: What Is The Difference Between Zinsser 123 And 123 Plus?

Is Zinsser 123 oil based?

Zinsser 13 oz.

Bulls Eye 1-2-3 White Oil Based Interior/Exterior Primer and Sealer Spray (Case of 6) provides excellent adhesion to glossy surfaces without sanding.

It’s great for interior and exterior surfaces..

When can you paint Zinsser 123?

Dries to touch in 5 minutes and can be topcoated in 30 minutes with latex or oil-based paints. For best results, allow primer to cure overnight before applying strong solvent- based topcoats.

Can you use water based paint over Zinsser BIN Primer?

Great for use on all interior surfaces & spot priming on exterior surfaces. It is formulated to seal, prime and block out stains on previously painted or new work. Any oil or latex paint can be applied over it.

Why use oil based primer?

For best results use an oil-based primer if your top coat is oil based paint, or latex based primer if your top coat is latex-based paint. … Primer-sealer paint seals the surface of wood so the finished paint does not soak into it. This allows you to have even gloss over the wood that is painted.

Is Zinsser paint oil based?

Zinsser Cover Stain Primer Sealer is a fast-drying, white-pigmented oil-based primer-sealer and stain-blocker for interior and exterior surfaces. … Primes and blocks out stains on smoke and fire damaged interior and exterior substrates. Adheres to non-porous surfaces – gloss paint, hardboard, glass.

Can you use Zinsser BIN over gloss?

On the original gloss boards which hadn’t been water-base-coat painted, the B-I-N was perfect, adhering really well to the gloss, giving great coverage and drying very quickly. It dries super fast and can be painted over after 45 minutes because it isn’t an oil based paint per se, but shellac based.

What is the difference between Zinsser BIN and Zinsser 123?

BIN is solvent (methylated spirit) based, 123 is water based both are good stain blockers but BIN is better for resin (knots etc) only for spot priming when used outside (no idea why I painted a whole stack pipe in it no problem) while 123 is for large areas.

Can I use Zinsser 123 as an undercoat?

allthebuttons. Zinsser’s primers (BIN, 123 and Cover Stain) all say in their technical docs that they can be painted over with any water-based or solvent-based topcoat. But they never actually use the word “undercoat”; they only describe themselves as primers.

What is better Zinsser or Kilz?

When applied to two different walls in the same space, two coats each, Original Kilz Primer allowed more bleed-through, while Zinsser provided better coverage. However, Kilz Premium is a high-hiding formula, with a whiter, thicker consistency for superb opacity.

Do I need to undercoat over Zinsser BIN?

Re: Zinsser B-I-N You usually do two coats of BIN and then you do not need to undercoat just go with two top coats. This would be the procedure if you are covering over varnish type finishes.

Is Zinsser BIN waterproof?

It can be recoated in just four hours and dries to a smooth, bright white, non-yellowing finish that resists dirt and dust pick-up. Watertite® waterproofing paint is guaranteed to keep water out and contains a biocide that protects the dried coating against fungal degradation for a minimum of 5 years.

Is it better to spray or roll primer?

Paint spraying is fast, but only after you conclude with the extensive preparation work. Rolling is slower, but it lays down more of a quality coat than spraying does.

Is Zinsser oil based?

Zinsser Cover Stain 1 Gal. Oil Based White Interior/Exterior Primer and Sealer sticks to any surface without sanding and can be used under and over oil and latex topcoats. It features an oil-based formula that seals stains from water, smoke, fire, nicotine and tannin bleed.

Can I use Zinsser BIN on plastic?

Zinsser BIN Primer Sealer adheres tenaciously to all dense, smooth and slick surfaces such as: dense hardboard, chipboard, glass, Formica, melamine, ceramic tile, plastic, GRP, PVC and metal pipes, radiators, grillwork, fire doors, old varnish, and galvanised ductwork.

What Colour is Zinsser BIN?

WhiteTechnical SpecificationsBrandZinsserRangeB-I-NColourWhiteLocationInterior & exteriorSuitable surfaceMulti-surface6 more rows

Is Zinsser 123 good for new drywall?

Bulls Eye 1-2-3® is great for new and previously painted drywall, plaster, wood, metal, vinyl, PVC, fibreglass, masonry – any interior surface. … It’s a gr eat base coat for decorative finishes – can be used under or over ANY oil or latex paint. You’ll never stop to change primers when you use Bulls Eye 1-2-3.

Do I need to use undercoat after primer?

“Yes, you need to prime first then undercoat and gloss. If the wood you or painting is shiny I would use a zinner primer first.

Can you use water based paint over shellac?

Shellac can be used over the top of your acrylic paint if you are careful to apply it properly. You can use one coat to seal the wood. All you need to do is rub it on liberally and then wipe the surface to seal it.

Does Zinsser Mold killing primer smell?

Zinsser Mold Killing Primer can be used to paint over and kill existing surface mold, mildew and odor-causing bacteria. … For example, bleach is commonly used to clean mold and mildew but it has harsh fumes and can be toxic.

Is Zinsser paint any good?

Zinsser Allcoat great stuff, as mentioned above, multiple coats on in a day. It covers well and dries great. The white isn’t the best for coverage, but the black always performs well. It has the added bonus of being a primer, undercoat and topcoat in one, so you only usually need the one product instead of multiples.

Should I use Kilz before painting?

This water-based primer hides surface imperfections and reduces the need for multiple coats of paint to allow a truer, richer color from the topcoat. … When painting to hide a previous color, KILZ® Primer reduces the need for multiple coats of paint to allow truer, richer color from your topcoat.