Question: What Is The Difference Between Sealing And Staining A Deck?

Should I Polyurethane over stain?

While staining creates a rich, deep color that highlights natural wood grain, it does not provide long-term protection.

Without a protective top coat, wood can be damaged easily due to contact with water, food, or sharp objects.

A polyurethane top coat protects the wood from scratches, stains and water damage..

What is the average cost of staining a deck?

The cost to stain your deck typically ranges from $540 to $1,050 with an average of just over $700. This equates to an average cost of $2 to $4 per square foot for labor and materials. Higher-quality stains will run up the price, as will washing or sealing the wood prior to staining.

Can you put Thompsons Water Seal over stain?

And actually, the answer is YES—you can use our EMTECH water-based sealer or top coat over the oil stain. The beauty of all our water-based sealers and topcoats is that they’ll level and adhere to whatever solvent- or oil-based stain you’ve used.

Should you pressure wash your deck before staining?

The short answer to this question is – Yes. But that is not all you should do if you want your deck stain to last. A good deck cleaner can remove the gray fibers, dirt, mold, mildew and other impurities deep in the wood. …

Is it worth staining a deck?

Staining a deck will lead to less work in the future. One of the main reasons the professionals don’t recommend staining wood decks is because of the amount of time and energy involved. Stains don’t generally last more than a year. This means yearly cleaning, staining and, if necessary, sanding of your deck every year.

Should you put a sealer over stain?

Applying a topcoat sealer is not required, but a finish protects the stained wood from scratches and keeps it from fading over time. If applying a polyurethane finish with a brush, apply one to two coats.

What is the longest lasting deck sealer?

1. BEST OVERALL: SEAL-ONCE MARINE Penetrating Wood Sealer. SEAL-ONCE MARINE Penetrating Wood Sealer is a clear water-based sealer, but it provides the protection you’d expect from an oil-based stain, penetrating right down into the wood fibers for long-lasting protection against moisture damage and mold growth.

What happens if I don’t stain my deck?

However, choosing not to stain or paint the deck is simply a preference of the homeowner. The effects that can occur due to a lack of treatment are aesthetic in nature. After 6 months, the wood will start to lose its color and will begin to fade. Ultimately it will fade to grey or silver.

Will pressure washing remove deck stain?

Pressure washing is a quick way to remove a deck finish, but it requires some care so as not to damage the deck. A pressure setting of 1500 psi should be strong enough to clean away deck stain. Hold the sprayer about 3 inches off the surface and move the sprayer as you work in the same direction as the grain.

What is the best way to seal stained wood?

Most stains should be sealed to prevent bleeding. After smoothing the stained wood, apply a sealer coat of thinned shellac, sanding sealer, or other appropriate sealer. Do not use shellac with NGR or water-base stains. If you plan to finish the piece with polyurethane, make sure the sealer is compatible.

Is it better to seal or stain a deck?

A: It’s really up to you. Just staining the deck will give you the color you want, although in high-traffic areas the stain could wear away quickly. … The advantage of this, they say, is the sealer provides additional protection against water and weather damage, while the stain helps reduce fading from UV rays.

What goes on first stain or sealer?

The key is to apply a thin base coat to partially seal the wood before wood staining. Sanding sealers, dewaxed shellac and wipe-on finishes will all do the trick. Some types of stain perform better than others on blotch-prone wood. … Just make sure the sealer and stain you’re using are compatible.

Does staining a deck seal it?

Most of the time, stains also contain a protective sealant. It’s a good idea, though, to re-seal your deck (or check that it needs to be re-sealed) once a year. Water-based stains can adhere to water or oil-based coatings already present on the wooden surface.

What happens if you stain a deck and it rains?

If it rains within 48 hours after you apply the stain, the water will soak into the wood pores and try to displace the stain. This will result in a splotchy surface rather than an even tone. If it rains right after you apply the stain, the stain will peel and flake off.

How long after staining can you seal?

Every finish and stain is different, and drying times can vary widely from brand to brand or product to product. As a rule of thumb, you should wait 24-48 hours to allow the stain to fully dry before applying your polyurethane. If you’re extra cautious, you may even choose to wait 72 hours before applying your poly.

What is the best stain sealer for decks?

Best Deck SealersThompsons Waterseal Advanced Natural Wood Protector.ECO-SAFE Wood Treatment – Stain & Preservation by Tall Earth.Rust-Oleum Coppercoat Wood Preservative.CabotStain Australian Timber Oil Penetrating Oil.Thompsons Waterseal – Transparent Stain.DEFY Crystal Clear Composite Deck Waterproofing Sealer.

What happens if you don’t seal stained wood?

A: If you don’t apply some kind of sealer the wood will be dried-out and lifeless. … When you rub stain into wood, it brings out the grain pattern and gives the wood a more dramatic look. The final step in staining wood is to wipe off any excess, so the process leaves nothing behind.

How often should a deck be stained and sealed?

For most decks, sealing once each year is a good rule of thumb. Depending on the condition of your deck this can be adjusted, but keep in mind that you should never go beyond three years maximum before re-sealing and staining.