Question: What Is A 515 Spray Tip Used For?

How do you know what size spray tip to use?

Understanding the NumbersThe first digit is half of the fan width, the “5” in “517” equals a 10 inch spray fan width (5 x 2 = 10)The last two digits are the size of the tip opening in thousandths of an inch, the “17” in “517” means the tip hole size is .017 inch..

What does a .517 tip mean?

Answer has 3 votes. Currently voted the best answer. “The 3 numbers used to describe a tip size, example 517, refers to the fan size and the orifice size. The fan size of a 517 is 10 inches wide, one foot from the surface being sprayed. The first number is always ½ the actual fan width.

Do I need to thin my paint for airless sprayer?

Latex paints are the most demanding when it comes to straining. They’re extremely viscous, so whenever you spray them with a handheld, HVLP, or small airless sprayer, you need to thin them down. Thankfully, it’s relatively easy to do. … Another minimum ratio that’s often used is 1/4 C water to 1 gallon of paint.

Can elastomeric paint be sprayed?

Waterbased elastomeric coatings are often the go-to choice for exterior concrete/masonry wall applications. … However, the required wet film thickness for many elastomeric systems is 27-32 mils wet. It’s highly unlikely that an acceptable finish can be obtained by spraying or rolling a product to this WFT.

What is a 311 spray tip used for?

The reversible RAC IV SwitchTips are the most widely used tip for spraying a variety of coatings from lacquers to exterior paints. Use the Reverse-A-Clean (RAC®) feature to quickly clear tip clogs by simply twisting the tip and spraying in the reverse position.

Are Graco and Titan spray tips interchangeable?

Amazon.com: Customer Questions & Answers. This only fits Graco RAC X tip guards but Graco tip guards will fit Titan guns. The tips alone aren’t interchangeable within the different guards though.

What is a 517 spray tip used for?

Achieve greater control and less overspray on different surfaces with a wide range of coatings, from stains to exterior paints. 10 inch spray pattern ideal for larger surfaces such as houses/buildings, walls and ceilings.

What size tip should I use to spray primer?

A general rule of thumb is: Heavy-bodied primers and primer surfacers work best when you use a nozzle size of 1.7 to 2.2. Basecoats should be sprayed with a 1.4 to 1.6 nozzle. Clearcoats should be sprayed with a 1.3 to 1.7 nozzle.

Should I spray or roll my cabinets?

Smoother Coverage. When professionals use a paint sprayer to paint cabinets, there’s no worry about leaving behind those unsightly brush strokes that come when they use a paintbrush or roller. Paint sprayers leave a nice even finish that doesn’t typically require touch up or sanding after the fact.

How do you clean the tip of a paint sprayer?

Wipe paint off of the siphon hose with a clean rag so your clean water bucket doesn’t become contaminated. I use a mix of water and ammonia to clean latex paint and BIN primer from my airless sprayer. Ammonia breaks down and loosens paint particles really well to keep your spray hose and pump clean for storage.

How long does a spray tip last?

Generally a RAC X spray tip will spray around 45 gallons of paint before it needs to be replaced. A RAC IV or RAC V spray tip will last for approximately 40 gallons. All tips will vary depending on pressure that the user is spraying at the the type of paint being sprayed.

Why is my paint sprayer spitting?

Spray guns spit when air is being introduced into the fluid outside of at the air cap. … A loose fluid nozzle does not properly seat in the tip of the spray gun and causes air to enter the fluid supply resulting in spitting.

Are Graco and Wagner Spray tips interchangeable?

These are usually ⅞ fitting, and they’re interchangeable between the different brand guns. Graco FFLP fit in the Graco RAC-X holder, while Wagner HEA use the Trade Tip 3 holder (e.g. an FFLP tip will not fit on a Wagner gun without swapping over the tip holder, etc.)

What tip should I use to spray cabinets?

For this type of project, where the surface areas are small, we recommend a spray tip that delivers a smaller spray fan. When spraying water-based enamel and satin finish paint, it’s best to use a 311 spray tip as it will deliver a 6-inch spray fan that is perfect for cabinets and smaller doors.

Can you paint cabinets with a sprayer?

Spray painting kitchen cabinets is also a good way to go if your cabinets have raised panels and lots of areas that might be hard to paint with a paintbrush or roller. If you’ve decided to spray paint your kitchen cabinets, you’ll want to buy a special sprayer to make it easier.

What is the best spray tip for latex paint?

Recommended Tip Sizes For Common Coating MaterialsLaquer or Stain.009 – .013Oil Based Paint.013 – .015Latex Paint.015 – .019Heavy Latex or Smooth Elastomeric.021 – .025Elastomeric & Blockfiller.025 – .035 +

What size airless spray tip is used to spray door frames?

A basic rule of thumb is to use small tip sizes (such as 0.009in, 0.011in, 0.013in) for thin / low viscosity materials such as stains & lacquers, medium tip size (such as 0.015″, 0.017″, 0.019″) for acrylic latex / enamel / emulsion / primer etc., then for heavier viscosity coatings use large orifice sizes (such as …

Do you use more paint spraying or rolling?

Then, if you choose to use a sprayer anyway, you’ll still need to buy more paint: Sprayers use about 33 percent more paint than rollers do. For a fraction of the cost, rolling paint is the budget-friendly way to go.