What is a urethane reducer?
Restoration Shop Medium Urethane Reducer UR70 is a mid temperature, 70 – 85 degrees, paint thinner/reducer.
This reducer may also be used to cut viscosity in any of Restoration Shop’s urethane primers, epoxy primers and urethane clearcoats..
Is nail activator the same as primer?
Some adhesive systems use so-called “primers” or “activators” that are applied to surfaces before applying the adhesive. … In other cases, the primer or activator actually is used to speed up the curing of the adhesive.
Can you put hardener in basecoat?
So if you’re doing any kind of base coat. All you do is add reducer in base coats for the mixing ratio. Because you’re not adding any catalyst or hardener or an activator, you don’t have to worry about hardening. Base coats are always mixed with reducers, a 50:50 ratio.
What is the difference between reducer and activator?
Some paints simply term their activator an “activator reducer”; most likely due to the activator already having the reduction components in the mix. You probably over-reduced the primer by adding more reducer but it’s not a huge deal – you’ll get less material thickness (film build).
Is activator and hardener the same?
From a general standpoint activators and hardeners do the same thing; initiate cure of 2K products. However, you must use only the activator each product calls for on the tech sheet and not interchange hardeners/activators from different brands or products.
Is reducer the same as thinner?
Thinners are for lacquer-based paints. Reducers are used for urethane-based paints. The two solvents are not interchangeable. For example, if the paint is an enamel-based product, do not use a thinner, but rather a reducer.