Do You Add Thinner To Clear Coat?

How much thinners do I mix with clear coat?

Mixing ratio: 4 parts primer 1 part 2k hardener then add 10% – 15% 2K Thinners to total volume mix, this can vary depending on spray gun set up (STIR WELL).

Only mix the amount of material you intend to use in one application.

Apply a cover coat and leave for 10-15 minutes depending on weather conditions..

Do you add reducer to clear coat?

The clear coat paint needs to be used within a few hours or else it will harden. Always use both acrylic hardener and acrylic reducer. … If you are looking to have a quicker-drying clear coat, add additional hardener. Always use clear coat with a paint gun.

Can you put Pearl in clear coat?

Candy Pearls can also be used to tint clear powder coat to create color matching powder to paint. Start with 1/2 bag per pound of clear powder. You can go as much as 1 bag per pound of clear powder as long as the pigment is staying suspended.

What happens if you put too much hardener in clear coat?

Incorrect mixing ratio: If too much activator/hardener is used, or if the correct ratio is not properly mixed, defects may appear in the finished dried paint film. Environmental conditions: Excessive heat or humidity during application and curing can cause surface imperfections such as cracking.

Can I mix paint with clearcoat?

This video breaks down how to use a mixing cup mix clear coat with a 2:1 ratio. Clear coat is required over all basecoats and is recommended over coarse metallic single stage paints. If you are looking to have a quicker-drying clear coat, add additional hardener. …