Can You Use Zinsser BIN Over Gloss?

What’s the difference between Zinsser BIN and Zinsser 123?

BIN is solvent (methylated spirit) based, 123 is water based both are good stain blockers but BIN is better for resin (knots etc) only for spot priming when used outside (no idea why I painted a whole stack pipe in it no problem) while 123 is for large areas..

Can water based paint go over shellac primer?

Can I used latex paint over shellac or oil based primer? Or oil based paint on latex or shellac primer? Yes, you can use ALL 3 types of primers over or under latex and oil based paint. Some glossy surfaces will benefit from sanding first.

Is Zinsser paint any good?

Zinsser Allcoat great stuff, as mentioned above, multiple coats on in a day. It covers well and dries great. The white isn’t the best for coverage, but the black always performs well. It has the added bonus of being a primer, undercoat and topcoat in one, so you only usually need the one product instead of multiples.

What is better Zinsser or Kilz?

When applied to two different walls in the same space, two coats each, Original Kilz Primer allowed more bleed-through, while Zinsser provided better coverage. However, Kilz Premium is a high-hiding formula, with a whiter, thicker consistency for superb opacity.

Can you use water based paint over Zinsser BIN?

allthebuttons. Zinsser’s primers (BIN, 123 and Cover Stain) all say in their technical docs that they can be painted over with any water-based or solvent-based topcoat.

What paint can I use over gloss?

You can use oil-based, water-based latex, acrylic, or any other type of paint to paint over the gloss paint because the surface has been sanded and prepared.

Do I need to undercoat over Zinsser BIN?

Re: Zinsser B-I-N You usually do two coats of BIN and then you do not need to undercoat just go with two top coats. This would be the procedure if you are covering over varnish type finishes.

Is shellac water based or oil based?

While oil-based poly requires 4 hours to dry between coats, these finishes are much faster: Lacquer (30 min.) Shellac (1 hr.) Water-based poly (2 hours)

Can you paint gloss over gloss without sanding?

If you attempt to paint over glossy paint without sanding then you will most likely have a peeling issue in the future. Since the paint will not have anything to grab on to it will chip and peel easily. To avoid sanding you can, however, use a liquid deglosser such as Krudd Kutter or M1.

Can I put undercoat on gloss?

“Yes, you need to prime first then undercoat and gloss. If the wood you or painting is shiny I would use a zinner primer first.

Does undercoat stick to gloss?

You must score or key the surfaces to be repainted. You are basically just taking the shine or sheen off of the paint so the undercoat has something to stick to. … Gloss has the shiniest finish and is more of an old fashioned look. Also the shinyer the finish the more any imperfections in the surface will be noticeable.

Is Zinsser BIN waterproof?

It can be recoated in just four hours and dries to a smooth, bright white, non-yellowing finish that resists dirt and dust pick-up. Watertite® waterproofing paint is guaranteed to keep water out and contains a biocide that protects the dried coating against fungal degradation for a minimum of 5 years.

Can I put water based gloss over oil based gloss?

Because water-based paint doesn’t bond well with the glossy surface of oil-based paint, remove as much gloss from the surface as possible before repainting. … You’re not seeking to remove all the paint, just sanding the surface until it’s level and no longer slick.

Can you Primer over gloss?

Using the primer was really easy and so much quicker than having to sand the area. … Just give the surface a clean and sand before painting. If you are painting over gloss woodwork with a satin or eggshell finish, you also won’t need to use this primer. Lightly sanding and cleaning will help the new paint adhere.

Can you use water based paint over shellac?

Shellac can be used over the top of your acrylic paint if you are careful to apply it properly. You can use one coat to seal the wood. All you need to do is rub it on liberally and then wipe the surface to seal it.

Is shellac primer water based?

Zinsser Shellac Primer Water Based Tintable.

Can I paint flat over gloss?

If you want your flat paint to stick to your semi-gloss you’ll have to rough it up a bit. In other words, you’ll first have to knock the sheen off the semi-gloss. … And keep in mind that flat paint, even supposedly washable flat paint, will never clean up as easily or as well, especially in kitchens and bathrooms.